Supply various capacity -1-50 Ton Hydraulic Bottle Jack

2ton bottle jacks

Direction for use

Tighten the valve clockwise to ensure that the oil return valve can not be turned as far as it will go.
According to the height of the car body,select the height of screw out.
Insert the handle without groove into the end.
Place the jack near the tire of the car chassis ,and pull the handle up and down to reach the desired height.
After completion,loosen the valve one or two turns times anticlockwise,and press by gravity.This jack does not have the function of automatic lowering.Remember that the oil return valve cannot be loosened too much,or the jack leaks oil.
Caution
Read all instructions before use
Never exceed the jack’s rated load capacity
Base of jack should always rest on a firm, level surface
Never work under the lift load without additional support devices
Never operate jack in angular or horizontal position
People Ask :Is a bottle jack safe for cars?

A bottle jack can safely lift a vehicle but it is not meant to hold a vehicle. Hydraulic bottle jacks are safe to use but use them with a jack stand.

Can I use a bottle jack on an SUV?
Bottle jacks have a small form factor and are easy to store. It also has a lifting capacity of up to 50 ton more than a scissor jack, but in most cases a 2 ton rated jack will suffice. The 2 ton (4000 lbs) jack is relatively inexpensive and can lift most sedans and SUV , making it an ideal jack for home repairs.

Post time: May-05-2023